Categories
Maker/Development

PocketMaker 3D offers 3D printing for pocket change

The concept of 3D printing brings to mind images of large, very technical machines designed to print out intricate creations. The PocketMaker 3D is here to prove that smaller printers can be as good.

The small, almost handheld printer can be a low-cost introduction to the world of 3D printing or an addition to an experienced maker’s 3D printing arsenal. With it, users can either wirelessly transfer their own custom 3D models from their computers to the device or select a model from dozens of options in the PocketMaker 3D’s companion iOS/Android app. No matter how it’s done, the printer can spit out something practical like an ashtray or something more decorative like a Mickey Mouse figurine.

Categories
Maker/Development Robots/Drones

Root programming robot helps STEM knowledge branch out

editors-choice-300x96With the world becoming increasingly modernized, the importance of having children engage in the principles of programming as early
as possible has skyrocketed. And while it’s easy to see the financial benefits of that exposure, what’s more important is the analytical and critical thinking it develops in those young minds. This is why the Root was created.

Root is a Roomba-looking robot that focuses on teaching both kids and adults valuable programming skills. The robot itself can attach itself and navigate walls or just wander about on the floor and is equipped with a variety sensors for coders to play with. The Root’s companion app has three levels. The first has a graphical interface that non-readers can use to learn basic concepts of events, sequences, loops, states, functions, priorities, timing, program stepping and debugging.

Categories
Kids/Babies Maker/Development

The SBrick Plus hides STEM education inside toy bricks

As a child, there’s not much better than having a full set of Legos to go to town on. As adults, there isn’t much out there as fondly remembered as the classic building blocks. Now, with the explosion of IoT technology, the SBrick Plus take clicking together plastic bricks up a notch.

The sequel to the successfully funded SBrick back in 2014, the SBrick Plus is a Bluetooth-enabled brick placed into Lego models to control them remotely using a smart device like a phone, tablet, gamepad or PC. What’s more, the SBrick Plus uses sensors from the WeDo 1.0 family that can be programmed in several languages and track variables like tilt and proximity for fun uses in model planes, for example. What the SBrick really allows for are dynamic educational experiences in the home and in the classroom, something the team behind the product facilitates with a series of lessons designed to teach the fundamentals of programming and robotics.

Categories
Imaging Maker/Development

I’m Back camera back adds digital functionality to your film camera

Digital cameras became the standard for professional photographers years ago, but many still have film cameras for which they’d like to have digital functionality.

patent-claimedI’m Back is a digital camera back based on thin Raspberry Pi single-board computers that attaches to film cameras and allows users to transfer photos directly to the Internet via a browser send feature and also receive emails. It connects to wireless devices via Bluetooth. Other features include a touchscreen TFT display. I’m back ships in December. Future pricing isn’t set yet, but its maker says he hopes to sell it for $199 or less. He hopes to raise $22,714 by July 21.

The concept is a good one and not without precedent. But it’s not clear just how many consumers beyond photo enthusiast film purists there are who wouldn’t rather just use their smartphone to take a photo if they want to make use of digital functions … or just buy a digital camera instead of I’m Back. The biggest issue for now, however, is that it’s not clear just what cameras the camera back is even compatible with. Its maker says only that I’m Back works with “a great number of models.”

 

Categories
Kids/Babies Maker/Development Robots/Drones

Codeybot drives a programmable wedge right into your adoring heart

The past ten years or so have seen a huge push towards STEM subjects in the United States to shore up the youth for a future society dominated by computer programming and robotics. But no matter how important the programming skills are, children w care about the future implications of learning them unless it’s fun to learn first.

Enter the Codeybot, another crowdfunded little robot designed to engage children in the fundamentals of coding from the creators of the Makeblock. What’s immediately noticeable is how its LED panel and extremely appealing, wedge-shaped single-wheel design serve to grasp the usually fleeting attention spans of children. To maintain it, children program Codeybot with an iPad app using the mBlocky language. (Sorry Android users.)

Categories
Connected Objects Imaging Maker/Development Sensors/IoT

Sweep eyes an opportunity for affordable LIDAR sensors

LIDAR sensor technology is being used in a growing number of products. For example, these sensors serve as the eyes of self-driving car, enabling them to detect other objects on the road. LIDAR scanners are sold on their own, but they tend to be too pricey for the average consumer, sometimes coming in at more than $1,000.

Sweep is an inexpensive scanning LIDAR sensor for consumer applications including high school robotics projects. digital art and drones. It can also be used to get the dimensions of a room much faster than it would take when using a tape measure. It can also be used to detect when somebody walks through a doorway or tries to touch something they shouldn’t. Sweep uses sensing technology that differs from most other LIDAR sensors on the market –- a technique that enables it to use lower power components to perform long-range measurements.

Categories
Kids/Babies Maker/Development Robots/Drones

The Kamibot papercraft robot combines coloring and coding

Even among coders, it’s been said that the act of coding can be endlessly boring. Imagine trying to get a kid to pick it up — let alone stick with it! The key with anything worth learning is to make it fun, and that’s doubly true for little ones. The three-man team at 3.14 is trying to do just that with its Kamibot.

The Kamibot is a LED-equipped puck-like robot designed to take on a number of different papercraft costumes for a revolving door of new personalities. For adults, that’s a gimmick. For little ones, it’s like getting a brand new toy every time they print out another skin from the company’s website. Kamibot is based on an open-source Arduino technology, allowing kids to dip their toes into wirelessly coding their Dracula or robot-skinned, well, robot with the MIT-developed Scratch language — all while keeping them entertained in the process.

Categories
Maker/Development

KeKeBoard wearable platform lets makers clothes the gap to smart apparel

In creating smart textiles, a lot of materials, soldering and sewing are needed. At this stage in smart textile production, though, the materials are large, the amount of soldering needed on delicate materials gets in the way of the garment’s form, and the amount of sewing needed is oftentimes tiresome. In short, making more comfortable, better looking smart clothing is missing something that could take the process of making it up a notch.

The KeKeBoard is a plug-and-play wearables platform designed specifically to address the many pain points found in smart textile creation and offer a wide range of options for makers, artists and engineers. Its use of proprietary, Teflon-insulated Ke cables come in at just .3mm in diameter — far smaller than the standard 3-pin JST connector cables common now. This allows for many more options in terms of textile selection and design.

Categories
Connected Objects Displays Maker/Development

Looking for a sign? Starling lets you connect one to the Internet

While some consumers are aware of advancements in LED TV technology, the same thing can’t necessarily be said for the use of LED lighting in signs. Signage just doesn’t usually tend to excite people in the same way that TVs do.

But that hasn’t stopped the makers of Starling from putting a creative spin on LED signs. Starling is an open source LED display that features a modular design and is Wi-Fi-enabled for easy connection to the Internet. The accompanying mobile-friendly Web application enables simple configuration and usage, allowing users to select the font appearing on the signs, as well as the scroll speed and other features. There’s also a mobile app for Android and iOS devices.

Categories
Maker/Development Technology

Alpha 2 robotic companion aims to be part of your family, doesn’t need a car seat

Previous campaigns JIBO and Buddy have shown how crowdfunding platforms are perfect vehicles to bring the dream of helpful robot companions to life. This time, company UBTech is hoping its bipedal Alpha 2 will not only catch backers’ attentions but also be an integral part of their lives too.

Boasting 20 joints that replicate human motion, Alpha 2 is an humanoid robot created by UBTech that’s all charm. Standing 17″ tall and weighing in at five pounds, Alpha 2’s programming offers the entire family a wide array of features to make daily living a little easier.