Author: Jeff Berman

Categories
Chargers/Batteries Smartwatches/Bands

SolarHug gives mobile phones an energy lift with the sun

Everybody with an energy-sucking smartphone knows how frustrating it is when the device goes dead mid-way through the day when they’re nowhere near a power source to charge it. That’s why wearable charging solutions are so appealing.

SolarHug can be used just like a USB flash drive. Just connect a smartphone, or other electronic device, to the bracelet and the phone will immediately start charging. In 50 minutes, the phone will be fully charged. One hour in the sun recharges about 5 percent of the bracelet’s battery. SolarHug is covered with a flexible solar panel that charges the battery inside, even if there is minimal light.

The device can also be used for 128 GB of data storage. Backers who pay £50 (~$78) as part of an early bird special (a 50% savings off its regular price) will get a SolarHug when it ships in April. London-based Grandpa Technology is trying to raise £70,000 (~$109,000) by mid January.

Similar wearable devices perform the same basic function, including the Carbon analog watch. The mostly aluminum SolarHug is not the nicest smart bracelet on the market, and its design could be a turnoff to some consumers. It also remains questionable how many consumers will spend more than $100 to wear a bracelet to charge their mobile device when much cheaper accessories can be bought that do the same thing.

Categories
Cell Phone Accessories Technology

InstaMote instantly turns your smartphone into a remote

Consumers continue to be attracted to new solutions that reduce the need for multiple remote controls in their homes. The InstaMote from Switzerland is the latest device that allows a smartphone to be used as a remote control, eliminating the need for all other remotes cluttering the couch and coffee table.

InstaMote attaches to a smartphone and transforms it into an infrared remote. Every infrared electronic device in the home is compatible with InstaMote, including air conditioners, fans, DVD players, Blu-ray players, game consoles and TVs. InstaMote is compatible with all iOS 5 and newer smartphones, as well as all Android 2.3 and newer smartphones. InstaMote has a built-in battery that will last about six months under heavy usage, and can be easily replaced. The device also has a larger working range, at up to 15 meters, than typical remote controls and more compatibility than standard universal remotes also. The first functional prototype of the device is ready now, but its maker doesn’t say at the campaign’s Indiegogo site when the final version will ship. The early bird price is $9 and its regular price is $12. Its maker is looking to raise only $500 by mid January.

Once upon a time there were easily a half dozen such devices on the market. There is little about InstaMote that breaks new ground and users of Windows Phone and other smartphone devices that aren’t Android or iOS are out of luck. But the price is right for Android and iOS smartphone owners and should make it worth a try for many of them.

Categories
Smart Home Technology

Habitat smart home protects, smoke detects, and opens your garage door

Home automation is enticing because it provides the ability to turn your electronic devices on and off from anywhere. But it needs to be easy to use and secure, and the Ottawa, Canada-based newcomer Habitat’s new automation system of the same name is both those things.

Like similar automation systems, including Linkio, Habitat is made up of several devices that can be connected to existing electronic devices in the home to control them. First is Habitat Hub, a mostly white desktop unit that takes up little room and serves as the brains of the system.

One key component separating Habitat from some other rival systems is that it includes a device, Habitat Park, specifically designed to automate garage door functionality. The third device is Habitat Protect, which integrates existing smoke and carbon monoxide detectors into the Habitat automation system, and informs users if there is an alarm or the battery in one of the detectors needs to be replaced.  It magnetically installs on a wall within range of a detector, and can easily be set up using the Habitat App on an iOS or Android smartphone.

The fourth device, Habitat Learn, comes with temperature, audio, motion and light sensors, and can monitor and react to events in the home, such as notifying the user when the refrigerator door is left open. Kickstarter pledges that include at least one of the devices start at $29, which includes one Protect. But there’s a catch: Pledgers must also back a pledge level that includes the Hub. For $89, pledgers can get one Protect and a Hub, and for $99, pledgers can get one Learn and a Hub. Shipment is expected in June and the company is looking to raise $80,000.

Habitat’s magnetic-locking system is appealing, and the Park device may be attractive to many consumers who own a garage door. But the $100 starting price tag is pretty similar to rival systems and the product will likely only find mass-market success if it can obtain major retail distribution. A lower entry-level price for each unit would help.

Categories
Technology Wearables

SmoothEye goggles combat DWI; tell you when to call a cab

Driving while intoxicated remains one of the largest safety issues facing the United States today. Thousands of people die in DWI-related car accidents each year.

The new SmoothEye, from a New Jersey company of the same name, resembles typical safety goggles. But attached is an infrared diode and small black camera that tracks the user’s eye movements to accurately measure alertness and focus level. The device is programmed to conduct the same sort of field sobriety test that’s used by police to estimate alcohol intoxication. Consumers can also use the device to discover what distracts them and what helps them focus. Backers who make a pledge at the early bird price of $149 or more are expected to get the device in March. Its maker is looking to raise $30,000 in crowdfunding.

SmoothEye lacks the fashion sensibility of a wearable device like the Vive Smart Bracelet, which was developed by students at the University of Washington and featured at Microsoft’s Design Expo, that can also measure a user’s intoxication level. SmoothEye is just too bulky for the average consumer to travel with it to a bar or other location outside of the home where it would most come in handy. The fact that it, at least initially, must be attached to a Mac or Windows PC to be used only makes matters worse. It is not yet compatible with any mobile devices. Still, the notion of a device that may prevent DWI’s is certainly welcome on the market, however awkward it may be.

Categories
Toys

Carbon Fiber Tiles add more fun to Lego time

Many kids, and even adults, love building with Lego bricks. The idea of enhancing a Lego-made building, vehicle or other design with tiles made from sheets of high gloss carbon fiber seems like a welcome addition to Lego fun time.

Mark Carpenter of Grand Rapids, Michigan, developed Lego-compatible Carbon Fiber Tiles with his Lego brick-loving sons. He initially began designed black ones sized at 1 x 2 inches each. Backers of the Kickstarter campaign who pledge $14 as part of an early bird special will get a pack of 10 tiles expected to ship this month. The Carpenter family is looking to raise $8,000.

There is certainly an audience for the tiles. But carbon fiber isn’t cheap and it’s questionable how many consumers will spend so much for a handful of tiles when they can opt to get cheaper individual bricks made by Lego at one of its stores that will accomplish much the same thing. There have been other Lego accessories made by third parties in the past, including TinkerBots and Brickmania Track Links. But those two products had more unique purposes and TinkerBots could also be used independently of Lego bricks. The Carpenters will need to push the envelope a little farther in order to make their idea successful.

Categories
Connected Objects Technology Wearables

Multifunction dog tag boosts luck of finding lost pooch

Dog owners dread the idea of losing their pooch. So, the idea of a smart, wearable device is a no-brainer for many pet owners.

The new Lucky Tag, developed by Los Angeles-based Beaconpliance, is a dog wearable device that combines three main features into one. The on-collar tag can be used as a tracking device to find a missing dog, but also offers location-based service social functionality among nearby dog owners, along with pet healthcare functions. The tag uses beacon technology to help users find their dogs. Each device has a unique ID configured for each dog and constantly sends out a Bluetooth signal as far as 250 feet for Android and iOS smartphones nearby to detect and locate the ID.

The “Find My Dog’ feature helps users locate their missing pooches with the collaborative efforts of Lucky Tag devices nearby. Lucky Tag owners can also exchange contact info with each other, enhancing the device’s social functionality. The device, meanwhile, tracks and logs each dog’s activity level and ambient temperature, and syncs the data with the user’s smartphone. Early bird backers can get a Lucky Tag by pledging as little as $29 and are expected to get the device in February. Beaconpliance is looking to raise $40,000.

Lucky Tag supposedly consumes less power than similar devices like Pawda and Tagg that use GPS technology. But GPS devices cover a much larger area. As Beaconpliance concedes on its Kickstarter campaign, the biggest challenge with beacon technology is that it relies on the collaborative support and power of a mass community. That means unless many consumers buy the device for their dogs, a key part of its functionality will not work well. That is a major downside of the device. But the relatively low pricing may be enough of an incentive for some consumers to buy one.

Categories
Tech Accessories Technology

MicroJib camera holder boosts GoPro’s creative possibilities from all angles

The popularity of GoPro cameras has been a boon for the makers of camera accessories. The new MicroJib from a Denver, Colorado, inventor adds pan and tilt functionality to the GoPro, expanding the creative possibilities of the action camera.

Panning and tilting enables freedom in camera motions that weren’t previously achievable with other extension poles. Backers of the Kickstarter campaign who pledge amounts starting at $79 will be able to get a MicroJib when it ships in April. Backers who pay $99 will still be getting one at less than the expected $109 retail. Backers who pay $129 can get a  limited edition green and black model. The campaign is hoping to raise $24,000.

MicroJib seems like a good bet for GoPro owners. The accessory’s mount is only designed for GoPro cameras, which limits its potential appeal to owners of other cameras. But MicroJib’s maker is planning to offer a mount as an add-on that will let users mount any small camera to the device.

 

Categories
Input Technology

101touch keyboard gets rid of manual typing; uses touch instead

One drawback of traditional computer keyboards is that there are a significant number of keys some users need to use on a regular basis that are not easily accessible. Another negative is the huge number of shortcuts that must be learned on a traditional keyboard for each new software program.

The new 101touch keyboard from the Czech Republic-based company of the same name addresses those issues by replacing the traditional keyboard with a completely touch-screen based solution. The keyboard allows the user to shift around keys to whatever positions they want them to be in and add frequently-used functions so that they no longer require any shortcuts to reach them. Playing a computer game will be easier with the 101touch because of the keyboard’s customizable intuitive controls that do away with the need to use a mouse to look through menus or memorize short-cuts and hidden functions. Although it was built using Android, the keyboard is compatible with any computer operating system, including MS-DOS, Windows, Linux, OS X and BIOS. New keyboard layouts can be installed quickly, the company claims, whenever the user shifts to a new program. To help parents limit the amount of time that their kids are spending on a computer, there is a time lock feature that sets how long the keyboard will be active for and when that time is up, the keyboard shuts down and cannot be reactivated without a password.

The keyboard uses an emulator that makes it possible for users to connect the 101touch to a computer and have it immediately start working, without any installation. Keys that computer users don’t use regularly have also been replaced with the most commonly-used computer functions, including open, save, save as and print.  Although the keyboard presented in photos at the Kickstarter campaign website has two screens, that is only a prototype and the final version of the device will have only one display. Backers who pledge £99 (~$154) will get the keyboard when it ships in November. The company is looking to raise £180,000 (~$279,400).

One drawback of a touch-based keyboard is that the user doesn’t get the tactile feel of a traditional keyboard each time a key is pressed, unless the 101touch’s makers can come up with a way to duplicate that experience. Gamers and other computer users who want to get some of the same benefits of the 101touch, but without the touch keyboard, will find the customizable Optimus Maximus keyboard a more appealing option.

 

Categories
Connected Objects Technology

Splitter resurrects Wi-Fi dead zones

It can be frustrating when an expensive router can’t provide Wi-Fi to the garage, a far corner of a large house or another Wi-Fi dead spot. Vancouver company ANTLamp has created a relatively low-cost solution.

The Splitter is a device that connects to a Wi-Fi router and splits power and data on a single network cable, enabling the user to place the router on a ceiling or anywhere else in the house where the best Wi-Fi coverage can be provided. There is no need for an extension cord or power outlet. The device can also be used to power small devices such as cable modems, security systems, lamps and some small TVs. ANTLamp is looking to ship the Splitter in August and backers can get one then by pledging $59. It is trying to raise $17,000.

There are certain applications where the device will certainly come in handy, especially if attaching a router to the ceiling is indeed the best location to provide Wi-Fi coverage for an entire house. But at least some consumers may be better off just buying a wireless range extender or wireless repeater at a lower price.  The product’s unoriginal name likely won’t help either.

 

Categories
Smart Home Technology

Linkio offers affordable home automation solution

Mobile home automation systems offer the undeniably appealing ability to turn off your appliances and other electronic devices when you forgot to shut them before leaving the house from anywhere. French newcomer Linkio is yet the latest company to enter the growing category with an affordable and simple solution.

The company isn’t shy about celebrating native language with the system’s components. The main component of the white Linkio system is “Le Hub,” a central control unit resembling a router that communicates with the rest of the Linkio system and wirelessly links the user’s mobile phone to their electronics in conjunction with “Le Remote,” a remote infrared controller that looks somewhat like a typical smoke detector. A separate “Le Plug” connector allows any electronic device that it’s plugged into to be turned on or off via a free mobile app. Also part of the system is “Le Switch,” a component designed to replace mechanical wall switches that enables lights and ceiling fans to be controlled manually and through the app. The targeted price of a full Linkio system package is €99 (~$123), and it includes one each of the Linkio components.

Linkio’s system is targeted at consumers who aren’t interested in buying an entire smart home ecosystem, but instead want the ability to control just a few of their electronic devices from outside the home. Linkio will also sell plugs individually at €19 (~$24) each. The company’s Kickstarter goal is to raise €50,000 (~$60,000), in order to mass produce the finalized versions of the Linkio components. Linkio expects electrical design optimization to be finished in January and for the finalized product to follow in October.

There’s been similar home automation system concepts before. The Webee smart home system is just one of many competing products to seek crowdfunding. Belkin’s WeMo Switch, meanwhile, is a competing product that’s already widely available. An advantage that Linkio has over some of its rivals is that it’s an independent system that requires no server dependency. Also, unlike at least some rival devices, Linkio supports Windows Phone in addition to the more ubiquitous iOS and Android. But the home automation category is just too crowded to expect Linkio will become a major mass-market consumer product.