Category: Imaging

Categories
Automotive Cell Phone Accessories Imaging Video

RV Rear View Camera streams video to keep trailer towers safe on the road

Those who travel the world in the front seat of a car attached to trailers are an admirable bunch. Most people would agree the amount of freedom they have is enviable but like all good things in the world, it comes at a cost. Having a long trailer attached to the back of any vehicle automatically makes it much harder to drive, and actions as basic as changing lanes or braking suddenly become much more dangerous.

The RV Rear View Camera system allows users to attach an Internet protocol camera, or IP camera, to a trailer’s rear window. Once attached, video is streamed to an iPhone mounted on the dash of the vehicle doing all the heavy lifting. This alleviates the blindspots created by towing an RV around and offers an increased sense of security to those traveling.

Unfortunately, those with Android devices are out of luck although those are in the works. For now, only iPhones 5 and 6 work with the $400 system. The product is expected to ship in January 2015 with a successful campaign of $10,500.

Categories
Cell Phone Accessories Imaging

MOS Kick is a tiny clip that can get your phone on a tripod

Does anyone actually use a camera that’s not built into their iPhone or smartphone anymore? The only problem with using a mobile device camera is that there usually isn’t a convenient way to make it stand up for videos, family pictures, and some of the more complicated photography such as time lapse photos and slomo videos. MOS Kick offers a tripod-type solution for mobile gadgets that is small enough to fit in a pocket or backpack. It is made of metal for durability, but is still lightweight. No measurements are offered, but it is compatible with all smartphones.

MOS Kick offers two things that similar products don’t: maximum portability and compatibility with all smartphones, giving it a definite edge. Interested backers may also want to check out the Stand-Pod campaign, and those who enjoy extreme close-up photography might be interested in C-Lens. This campaign seeks to raise $25,000 by December 17, 2014. Early bird backers get one product for $25, with an expected delivery of January 2015.

Categories
Imaging

Panlight sets the plan right to remotely position cameras and flashes

Professional photographers use a beefed up flash system for extra light. They’ll set up these speedlight flashes and then move around to get the best shot. Unfortunately, to adjust the flash, they have to lower down the stand, angle the flash properly and hope it’s in the right position.

Panlight uses a remote control to adjust the speedlight for you. From up to 100 feet away, the photographer can move the flash up and down 180 degrees and 360 degrees around. In addition, Panlight offers the perk of being able to attach your camera to it in order to control that remotely as well. This will let your DLSR reach new heights of photography without having to climb a ladder. This product works with standard tripods and camera stands. It can support mirror-less cameras up to two pounds. To power, use four AA batteries.

This is certainly a nifty device that will help tons of photographers. Weddings in particular are difficult to photograph because there’s so much going on. A remote control will certainly make the entire process easier. It’s too bad, though, that Panlight is powered by batteries. A rechargeable battery would make more sense. However, there’s always the possibility of running out of juice in the middle of a wedding, in which case spare AA batteries would come more in handy than having to recharge. For £95 (~$149) backers will receive their very own by March 2015. The UK made Panlight is looking to raise £23,000 (~$36,000) on Kickstarter.

Categories
Cell Phone Accessories Imaging

MAGcro is another smartphone macro lens ready for extreme close-ups

It’s amazing how the world of photography has opened up to anyone who owns a smartphone or tablet these days. In fact, even macro photography is an option because of products such as MAGcro. This item was created by a couple of ophthalmologists and works with a smartphone or tablet, offering up to 10 times of magnification. The aspheric lens is fire-polished and made of high quality crown glass. The micro suction base makes it universal, compatible with most smartphones and tablets.

One of MAGcro’s best features is that it’s easy to transport since it is small enough to attach to a key ring. Though one might want to consider the possibility of a scratched lens before carrying it around that way. This campaign seeks to raise $5,000 NZD (~$4,000 USD) by December 13, 2014. For $25 NZD (~$20 USD), early bird backers get one lens with an expected delivery of February 2015.

Categories
Imaging Tech Accessories

Photography turntable offers PC-connected 360-degree photos

In the artistic world, 360° photography is really taking off for photographers, and companies like PanoCam 3D and Ricoh are offering both professionals and casual users options to take advantage. Companies who want to fully want to display their products and make all angles available to consumers are out of luck, often having to fork over at least $2,000 for 360° photography solutions. Lower-end solutions are just out of the question with their lackluster quality.

IconasSys’ 360 Product Photography Turntable and Software is a middle-priced option compatible with major DSLRs, and offers companies the most bang for their buck. The system is easy to use, and the software allows for on-the-fly adjustments to camera parameters. When users are done, the software is able to stitch together a full 360° of the product to increase online engagement and convert that engagement to sales.

Other options take panoramic pictures of the world outside and cost a fortune to do so, so the IconaSys system doing so for products and being available for just $409 is a big deal. The campaign is looking for $12,500 to introduce this product to market by February 2015.

Categories
Imaging Wearables

Get your GoPro extreme video on your wrist with the Removu P1

GoPro has established itself as the de-facto action camera brand on the market. As such, it is the first choice for many extreme sports enthusiasts. One of their most recent products, the GoPro LCD BacPac, gives users a touchscreen LCD that allows control and playback of photos and videos directly from the GoPro camera itself. The downside to this is that it isn’t happening on the fly, limiting how much control you have over the final product.

The Removu P1 addresses this problem by being a Wi-Fi mount for the GoPro BacPac, facilitating a live view from the GoPro to the device on your wrist. Since its display is also touch, it doubles as a remote control from the GoPro itself, giving you additional control over what your final video will look like. With a three hour video capacity, there’ll be a lot of decisions to make when it comes to editing, but luckily you can do so from the Removu P1 itself.

The product will no doubt be useful but those who would want something like this will probably be in the minority. The Removu P1 is currently $69 during their $30,000 campaign, with an estimated delivery date of January 2015.

Categories
Imaging Tech Accessories

Infinity Arm offers a variety of ways to mount your GoPro or other camera

Small mountable cameras like the GoPro enabled action sports enthusiasts and other filmmakers to take the craft to brand new angles and locations. The Infinity Arm tackles two of the biggest problems that GoPro accessories have. First, the Infinity Arm is lightweight and easy to mount on virtually any sturdy surface, creating even more opportunities for creative filmmaking. Second, the arm is incredibly sturdy, not breaking apart while being shaken or put under even the harshest conditions.

To make this an even better product for filmmakers, Infinity Arm works equally well with DSLR and other professional movie cameras. What this creates is a tool that anyone shooting a movie from amateur to professional will want to have on hand at all times. Infinity Arm has interchangeable mounts that are quick and easy to swap out without compromising the structural durability of the arm itself. Made out of aluminum and steel, Infinity Arm is tough enough to handle any assignment and turn out great, eye-catching shots in any and all environments. Creators 27Notch are asking for $50,000 to finish off the last bit of necessary funding to bring their product to market. Interested consumers can grab an Infinity Arm for $179, with an estimated delivery in February 2015.

 

Categories
Imaging

MagSphere and MagBounce flash diffusers mellow the harsh

Photographs are important to us. They document the best moments in our lives, they inform us of what’s going on in the world and they keep our memories alive. That’s why bad photographs are the enemy. No one wants a giant shiny forehead front and center in their wedding portraits. That’s why the folks at MagSphere have come up with a way to calm your flash down for more flattering light. It fits over the MagMod, a flash modifier, and looks like frosted glass. MagSphere dims and softens light so that it spreads in a more flattering way instead of tacking itself to your every flaw. Best of all, it includes a gel slot so that colored light is also possible if you want to get really fancy.

The similar MagBounce, also included in the campaign, is an open version of MagSphere that increases the size of your flash by 300%. It still softens the light, but expands it as well for when you need some extra shine. For more detailed information on all things light, visit the campaign.

Usually, a product that is only compatible with a certain brand, as the MagSphere and MagBounce are with the MagMod, seems a little inconvenient. However, backers don’t seem to mind, flocking to this campaign with support. Similar products we’ve seen on Backerjack, like the Flekt, offer light diffusion, but are limited in their options. They work to expand light, much like the MagBounce does, but few aim to soften light, like the MagSphere. For $79, backers will get one MagSphere and one MagBounce. Higher reward tiers offer the MagMod, a smart move on the part of the creators, for estimated delivery in February 2015. These light diffusers hope to raise $50,000 on Kickstarter.

Categories
Imaging

Lumera adds Wi-Fi, Bluetooth, GPS and remote control to your DSLR

For photography enthusiasts, every opportunity for a snapshot means making a decision. With the ever-present smartphone, pictures can be taken anytime, anywhere and shared immediately with location information and other data. However the quality of these pictures, even with more megapixels, never holds up to what can be done with a professional grade camera.

Lumera is a camera accessory with the design to bridge this gap. attaching to the bottom of any camera with a tripod screw, Lumera offers one-button sharing to various social networks or cloud storage sites. When paired with the Lumera Android or iOS apps, Lumera can do even more, including wireless aperture control, time-lapse settings, and more. Lumera uploads either through Wi-Fi or Bluetooth LE 4.0, and is OpenSource and Openhardware friendly to allow for the potential of even more unique features later in development.

If the camera’s memory card is getting too filled up with photos, Lumera has an additional USB port built in to allow for the connection of any USB storage device to store any overflow photos. As of right now, Lumera only officially supports certain Nikon and Canon cameras, but offers a survey where the development team can confirm whether the camera is supported or begin working on support for it. Lumera Labs needs $90,000 CAD (~$80,000 USD) to engineer the product’s design, complete the apps, and get Lumera certified. Lumera will be out in May 2015 to those that pledge $170 CAD (~$150 USD).

Lumera’s features are all more or less offered by using a Wi-Fi enabled SD card like Eye-Fi, but offers the freedom of flexible hardware and ideally limitless storage through the USB port. Professional photographers who demand the most from their equipment will love the sharing features without sacrificing quality, but only the most dedicated will need to keep Lumera on hand.

Categories
Arts Imaging

Kula lets your camera produce 3-D images

From movie theaters to handheld gaming consoles, 3-D photos and videos are a great way to create stunning viewing experiences, but so few people have access to the technology to create this content.

Kula is a new modification for SLR cameras and smartphones to open up the world of 3-D photography to everyone. The Kula Deeper is a lens attachment for SLR cameras that can take 3-D photography, while the Kula Bebe attaches right onto the phone’s lens for easy 3-D photos.

Using high precision mirrors, Kula takes a normal picture and captures it from two perspectives that can be combined to create a three dimensional image or video. The Kula system is flexible and works with any existing 3-D viewing technology, from the classic red and cyan anaglyph glasses and eye-crossing stereograms to 3-D TVs and Oculus Rift. Icelandic inventor Iris Olafsdottir has set Kula’s fundraising goal at 233,626 DKK (~ $40,000 USD), and buyers can get the Bebe adapter for 205 DKK (~$35 USD) beginning in March.

Kula is an affordable, easy to use way to create 3-D images to share with friends and family. The sheer number of ways Kula’s 3-D can be viewed makes it great for sharing and compatibility.