Category: Sensors/IoT

Categories
Sensors/IoT Sleep

Smartphone-adjustable ThinkPillow measures sleep, wakes you up

Sleep is one of the most important ways to stay healthy. Sleeping resets mind, body, and soul, giving the chance for healing. However, most have trouble with their sleep patterns, either waking up in the middle of a REM cycle or sleeping for too short of a time.

ThinkPillow is a smart pillow that is fully adjustable in height and firmness. It is designed with special technology aimed at fixing any kind of spinal pain. Not only does it come with comfort, however, but it also tracks your sleep patterns. With this data, the accompanying smartphone app can choose when to wake you so that you’ll feel alert and refreshed instead of bedraggled and exhausted.

ThinkPillow’s smartphone app charts sleep patterns over time and, as such, can be useful to physicians if something goes wrong. In addition, it lets the user track what they’re doing three hours before bedtime and can make suggestions based on those habits. For instance, if the user isn’t getting enough sleep, but drinks coffee every night, the app will tell them to cut it out. ThinkPillow also spies on family members and lets users see the sleep patterns of mom, grandma, dad or whoever else uses the device.

Getting the right amount of sleep can be truly difficult. They say you should get out of bed when you initially wake up in the morning, but if that’s too early for some, they’d rather get another half an hour of sleep. It’s great that ThinkPillow can tell when the person is actually asleep, not just when they intend to be asleep, and uses that to wake them up in the morning. While well-intentioned, the family sharing feature may get a little annoying to some. Though it is good for elderly family members who are too far away to check up on. One ThinkPillow can be had for $102 NZD (~$79 USD) for estimated delivery in April 2015. This product hopes to raise $50,000 NZD (~$38,800 USD) on Kickstarter.

Categories
Home Sensors/IoT

Ramos uses a Bluetooth beacon to coax your butt from the bed

Getting up in the morning for some is a delight and for others means terror. Getting up on the wrong side of the bed means a day full of disappointment. Sometimes the way we get up can determine the course of the day.

Ramos is an alarm clock that not only gets you out of bed, but does so the right way. The alarm consists of three parts, first the clock by the side of the bed, a Bluetooth sensor, and your smartphone. Upon waking up, the user must get out of bed and bring their smartphone close to the sensor. Distances can be customized, but most choose to put the sensor in the bathroom or kitchen next to the coffeepot. For heavy sleepers, Ramos requires a four digit code to really make them think.

The accompanying smartphone app allows for multiple alarms, snooze limits, multiple users, and more. A courtesy mode makes one initial beep, but then shuts up to consider letting others sleep. The user can also play their own music with or without a gradual loudness mode to make waking up a little more smooth. With a USB port, you can charge your smartphone so it can stay attached to the alarm and the alarm runs on battery when unplugged, so it can never be tricked.

Ramos has really thought of everything in terms of waking up. The movable sensor makes it easy to prepare for different kinds of days. Its various modes consider the comfort of bedfellows and family members. Best of all, it doesn’t wake you up with a greased pig-like chase around the room like some unconventional alarms do. For backers who want to get up in the morning without feeling like committing murders, try Ramos for a donation of $99 in either white or black for estimated delivery in May 2015. Ramos is hoping to raise $100,000 on Kickstarter.

Categories
Connected Objects Cooking Sensors/IoT

Pantelligent takes the guesswork out of cooking; makes sure you can stand the heat in the kitchen

Objects everywhere around us are becoming smarter. It’s now a cinch to keep lawns watered, pets fed, temperatures regulated, security systems activated and so much more. What could be next?

Pantelligent lets you cook smarter. This Bluetooth enabled pan monitors the temperature of its surface and sends the data to an accompanying smartphone app. It tracks heat to make sure that the food won’t burn or sit there cold. The app also comes equipped with recipes for salmon, steak, chicken, scallops and much more. For added convenience, the recipes can be read out loud so you’re not stuck hunched over instructions. In addition, the recipe will indicate when the cut of meat needs to be flipped over. Pantelligent also allows for new recipes to be put in, so that it can be used for everyone’s food preferences.

The scores of testimonials on the campaign page say that Pantelligent helped cook the best meals of different people’s lives. Someone says it’s like a GPS for cooking. All in all, Pantelligent seems to live up to the hype as a unique product useful for many. It’s unclear how Pantelligent cooks red meat, however, or if it can work with different meat temperatures. Still, many still find cooking a mystery and this product clears up a lot of the guesswork. For $199, backers can have their very own with estimated delivery set for August 2015. This product is looking to raise $30,000 on Kickstarter.

Categories
Health and Wellness Sensors/IoT

MOCAheart looks after vitals, lets you check up on loved one’s hearts

Health monitors that send information to smartphones are becoming increasingly popular. It’s an easy way to collect important data and send off to doctors if need be. They also provide a way to track patterns and trends, hopefully catching harmful conditions early on so they don’t get worse.

MOCAheart is one such monitor. This small metal sensor about the size of a contact lens holder measures heart rate (bpm) and oxygen levels in the blood and sends such data to its accompanying smartphone app. With this information it generates the MOCA index, a number that tells you how you’re doing. Zero is low, but still okay. One is normal, two is slightly high, at three they recommend you make a doctor’s appointment and four means you should seek immediate medical attention.

In addition to monitoring your own health, MOCA hooks up with other MOCAheart owners through the app. This way, you can monitor the health of loved ones. The app also allows users to put notes next to their readings, like one man does in the campaign, saying that his vitals show he’s stressed because he has to work late. It also records the date and weather of each reading, demonstrating how lifestyle can affect blood pressure.

MOCAheart joins scores of other health devices that make monitoring one’s health super easy. The size of the sensor itself makes it convenient to carry around and the two touch method of reading vitals is too simple to mess up. Perhaps the best part, though, is the ability to check up on loved ones. This seems great for younger generations making sure their elderly parents or grandparents are okay. Though this could get annoying after a while, however productive. Backers can own their own for a donation of $99 with delivery in April 2015. MOCAheart is looking to raise $100,000 on Kickstarter.

Categories
Safety Sensors/IoT Tech Accessories

FLASHNUB sensor tells you when the door’s ajar with a light show

The steady creep of wireless technology into homes has made the ability to stay informed less of a luxury, with home automation and sensor options becoming more commonplace as their design and price reflect the simplicity of their utility. The biggest danger with this approach is running the risk of being too simple.

Many  years ago, a device like the FLASHNUB door activity monitor would possibly turn some heads, but now can only be a lackluster idea at most. The device works by attaching a battery-powered sensor to a door that contains a contact point. Once that contact point is broken by an opening door, the device sends an alert through Wi-Fi to the connected USB-dongle that emits a three flash light.

The product itself is incredibly simple and is more of a DIY project than something to be considered a serious product, so its $60 price tag is a bit of a mystery. As such, there are other far more mature solutions for situations that require staying informed. The FLASHNUB campaign is looking for $50,000 to get the product out to backers by September 2015.

Categories
Sensors/IoT Wearables

Breathe easy with the TZOA wearable environmental tracker

The more the world undergoes urbanization, the worse air pollution becomes. Unfortunately, the environment around us is largely invisible and therefore most people don’t pay attention to it even if our health is being adversely affected. The people who do pay attention to what’s going on feel generally powerless to do anything about it mainly because they don’t have the tools at their disposal to make their case, having to rely on spotty and infrequent monitoring by governments that don’t prove very much at all.

The team behind the TZOA wearable environmental tracker is looking to put some smarts in the hands of those concerned. The tracker is outfitted with a proprietary optical air quality sensor that’s able to detect particulate matter 2.5, or PM 2.5. These tiny floating particles are found in harmful pollutants, like car exhaust and the smoke that results from wood burning, and cause permanent damage to our lungs.

Keeping the levels of PM 2.5 in the environment manageable is key to fortifying air quality, so TZOA’s companion app alerts you to elevated levels of contaminants and suggests actions to clean up the air around you. The app also collects the data to create an air quality map so that others can easily see current levels, overtime composing an air quality timeline for reference. The TZOA environmental tracker is $150 CAD (~$130 USD), and backers will receive the device in August of 2015 should its campaign reach its $110,000 CAD (~$96,000 USD) goal.

The TZOA team has similar ambitions to those behind the AirBeam in that they aim to create a platform where people can stay informed using crowd-sourced data about pollution. The AirBeam includes a few more sensors at a premium, but it seems like it would be more worth it as people are already using the AirBeam versus the unreleased product in the TZOA. In any case, as much as the problem of air pollution is a problem of information, various disconnected platforms addressing the same issue in the same way will ultimately do no good in the long run.

 

Categories
Input Sensors/IoT

Backtrack monitors spinal movement with eye to those in rehab

As we age, we begin to slow down. For example, our backs give out and injuring them could mean immobility for weeks.

Backtrack is a sensor that tracks movements in real time in 3-D. Connecting to any smartphone, the image shows movements on the screen. With this data, advanced algorithms can be applied to analyze how to improve movements and really show what’s going on, especially in physical therapy situations. The product itself is a small blue piece of rubber (obviously with more stuff inside). The campaign does a good job of showing how moving the sensor tracks those motions on the phone.

While the idea of translating three-dimensional motions onto a phone is a novel one, it doesn’t really seem necessary. The technology is still too new to really do much with the data collected. The campaign mentions vague “advanced algorithms” but it’s confusing what these really are. Backtrack seems to have fallen into the trap of sensor without feedback. Other sensors, like the runScribe track motions and then provide useful tips about adjustment. For their very own, backers can donate $150 CAD (~$131 USD) for estimated delivery in July 2015. Backtrack is looking to raise $50,000 CAD (~$44,000) on Kickstarter.

Categories
Connected Objects Health and Wellness Sensors/IoT

uHoo monitors your air, doesn’t taste like chocolatey chemicals

Every single second of our lives, we breathe. Inhale, exhale, inhale, exhale: it is this unconscious rhythm that keeps us going, but seldom do we stop to think about the quality of the air around us. We can only do so much about the air outside, but there’s no excuse to being ill-informed about the air in our own homes. The company behind the uHoo is looking to make it easy to know what’s lingering in our own bedrooms, kitchens, and bathrooms so we can take the actions necessary to protect our health.

Bad quality air can be the cause of all kinds of immediate respiratory issues like allergies, and chemicals and other pollutants can affect our health in the long term. That’s why the uHoo has five sensors that measure particulate matter, airborne chemicals, temperature, humidity, and CO2. It communicates this information to you through a companion app compatible with iOS using Wi-Fi, with an Android and Web-based app coming later. The sparse app gives you an overview of your home’s air quality and gives you details about specific sections of your home, sending alerts whenever it senses something out of the ordinary. Stay on top of your air with $129, and expect a uHoo in June of 2015. The campaign is looking for $30,000 to get uHoo out to backers.

uHoo is continuing the trend of arming users with lots and lots of information about the air, like the similar Table Air. But even if the information it provides is valuable, it isn’t doing enough. A device like this should serve not only as a data recorder but intelligently connect to and control other devices in a home to actively provide that cleaner, healthier environment while you go about your business. It was minimally designed to blend in with your home, but maybe it blends in a little too well.

Categories
Sensors/IoT Smart Home

Aria detects radon and IAQ, reports it to your smartphone

Pollution is a big problem, but it’s not one that’s limited only to big cities or industrialized areas. The truth is that indoor air quality, or lack thereof, is the cause of thousands of deaths each year, whether it’s carbon monoxide or the harder to detect and deadlier radon.

Aria is a home air quality monitor that can detect radon and other pollutants and report on air quality in real time, giving homeowners plenty of time to react and protect themselves from harmful gases. Aside from the colorful light indicating air quality on the device’s exterior, Aria can also push notifications using a Wi-Fi network to owners’ phones, alerting them of an issue with the air at home even from a distance.

While Aria’s light functions with some basic indicators (green means good, red means bad), more detailed information is uploaded at all times to the app, letting users know when to ventilate or call for outside help if necessary. Aria breaks this information down hour by hour, giving a detailed report of when pollutants are entering the home. Aria developer RSens is asking for $95,000 to offset manufacturing costs. The device itself costs $99 for early supporters and is expected to launch September 2015.

It’s hard to be overly cautious when dealing with something that could be potentially life-threatening and hazardous to an entire family. That being said, asking a device to provide hourly breakdowns of air quality on demand seems a little hypochondriac. It’s nice that the device offers this level of performance, but many users might not need to be so plugged in to what the air is like at home at all times. Either way, there’s some peace of mind to be gained in knowing Aria is looking out.

Categories
Sensors/IoT

O2 can breathe easy as another sensor-filled tag

Wearable technology has been able to provide those living in the 21 century with some of the most amazing benefits on an individualized level. O2 is another one of those interesting creations. The device is coin-sized and will function for up to 90 days with Bluetooth 4.0. It appears that there are multiple O2 devices with the capability to function in various ways:  the product allows its user to gather information about the weather and environment, operates with reaching exercise and fitness goals, reports information about sleep patterns, or tracks personal belongings.

Currently, it is only compatible with iPhone 4s & later, iPad 2nd Generation & later, and Android devices with 4.3 or above. O2 has such a wide range of uses that users will rejoice in its versatility. However, the campaign could use a good proofreading as the spelling mistakes are quite distracting. This campaign seeks to raise $100,000 by December 23, 2014. For $49, backers get three products and may choose from black, white, sky blue, pomegranate red, or lemon yellow. Expected delivery is currently set for February 2015.