Our mobile devices have precise battery meters, but the portable chargers for them may have at best a couple of LEDs. The Fig Battery Back takes the guessing game out of determining if your charger has enough power to restore you to Candy Crush saga heaven (or maybe hell). The Fig has two USB ports, making it able to charge both smartphones and tablets . The Fig also has the capability to recharge via solar power. Units are available in 6000 mAh and 10,400 mAh. For $59, a backer gets one 6000 mAh Fig unit with an expected delivery date of April 2014.
For those who like to enjoy a beer along with their cooking preparations, Bottle Opener Board (BOB for short) is likely to be your best buddy forever in the kitchen or at the grill. The Bamboo cutting board sports a bottle opener at the end of its handle (or in the corner for the travel size version) so that when you’re on a roll with that knife and somebody wants a drink, you just slide BOB over so your guests can pop their top. Now, if you’re going on a picnic or doing some camping, BOB might be just the thing. However, you might be just as well served by putting a bottle opener on your key ring or making certain to bring along your Swiss Army Knife — unless you’re going to be with an uptight group of stuffy accountants or attorneys and you want an effective conversation starter. For a pledge of at least $9, a backer gets a travel-size BOB (more like Newhart), or for at least $20, a standard-sized BOB (smaller than Saget). Either option has an expected delivery date of June 2014.
For those times when you’re stuck between standing and a seat-place, try Purrch. Purrch is essentially a little stool to lean on when seats are scarce. It looks like an angled cane with a bike seat on top. The shaft of Purrch is made out of lightweight aluminum and designed to hold up to 400 pounds. Purrch’s Indiegogo campaign has a goal of $75,000 in 60 days and features an early-bird price of $70 and a regular price of $77 (which includes a ‘Strrap’). Purrch is for people who either spend too much time sitting or standing or people who need to take a load of at inconvenient times. An alternative to canes with integrated seats, Purrch is not recommended to use if weight loss is desired; fortunately, it can sustain up to 400 lbs. of backward-leaning girth. Purrch currently has not specified an estimated delivery date.
The Premise. The Eco Movement is all about living life in a sustainable way, including recycling anything and everything possible. it’s one thing to upcycle a water bottle, but one’s furniture poses a bit more of a challenge.
The Product. Flatgoods offers an array of furniture made out of durable cardboard. The company ships it flat and it is up to the buyer to assemble. One-upping Ikea, Flatgoods offers anything from side tables to sofas with the option to print custom designs on any piece. All Flatgoods furniture is 100% recyclable.
The Pitch. Flatgoods’ Kickstarter campaign gives a detailed list of all pieces available to purchase. The video gives a little back story on the creator, James Mikrut, as well as shows people standing and even bouncing on different Flatgoods products to demonstrate how stable they are. Mikrut hopes to raise $20,000 in his 31 day campaign. For more information, visit the Flatgoods Web site.
The Perks. Each Flatgoods reward tier offers backers a ton of options to choose from. For $30, backers can pick one piece from an array of end tables, kids chairs and stools all shown in photographs at the bottom of the campaign. Tiers go all the way up to $150, which earns backers the choice between sofas, different sets of kids’ furniture or even a conference table with the custom design option. Current estimated delivery is set at May 2014.
The Potential. Flatgoods’ biggest claim to fame is that its products are 100% recyclable. That said, Flatgoods furniture would be difficult to reuse as furniture because it certainly isn’t as durable as wood and one spilled coffee would be deadly. Another problem is that Flatgoods furniture looks like it’s made out of cardboard. There are many other cardboard furniture companies, such as Chairigami, that uses more innovative design techniques so that their products look like actual furniture. Some of these companies got their funding from Kickstarter, like SITGREEN and Re-Ply. These two in particular focus on taking the moving box look out of their products. All in all, Flatgoods is on the right track and their products are great for kids, but wouldn’t necessarily blend into adult dining rooms or offices as the Kickstarter campaign suggests.
![Go Phone iPhone case ba0e3633e1e631062b06ffb49df0ea9b_large[1]](http://www.backerjack.com/wp-content/uploads/2014/02/Go-Phone-iPhone-case-ba0e3633e1e631062b06ffb49df0ea9b_large1-300x200.jpg)
If you are a sports enthusiast with aspirations of going pro or someday engaging in the Olympics, you may find the GoPhone iPhone case to be a useful tool for sharpening your game. The iPhone case is intended to be compatible with an iPhone 5 and 5s. The case doubles as a handle and monitor for a GoPro camera. The GoPro app allows the user to have a monitor for their device through the iPhone screen via its wireless technology. The GoPhone case then allows the user to connect the two so that it becomes an all-in-one portable camera kit. Depending on what a person is trying to accomplish and their creativity level, it’s possible that just using an iPhone mount would work just as well as the GoPhone iPhone case. For a pledge of $40, backers get a complete product with an estimated delivery date of September 2014.
The Premise. Everyone has to do laundry, but the process of washing and drying clothes is incredibly expensive and can be damaging to items of clothes. To preserve their items, many families are turning to air drying – it’s more economical and doesn’t cause shrinkage. But there isn’t really a sturdy, compact device that provides adequate clothes-drying space.
The Product. DryAway seeks to replace “traditional” laundry hanging racks with something more slender. The company has developed a permanent fixtures that can be tucked away into the space next to the machines or in a closet. Essentially, DryAway consists of tall, bamboo frames with adjustable hanging rods. The frames are mounted onto tracks, which then can be pushed backwards. No unsightly mess and the clothes go out of the way while drying. It’s a similar design to those ultra-thin “pantries” that can be built in next to the refrigerator.
The Pitch. The premise-heavy video spends a lot of time talking about all of the other options that are available and not painting them in a great light, obviously. The campaign page shows DryAway in all of its multiple configuration glory embedded into a wall or available in a standalone closet scenario. Inventor Jim Lutz reads that the product, which now has its own Web site, took four years to develop.
The Perks. To get a DrayAway of one’s own, prepare to slide over $445 for the system. Obviously a set like this is going to cost, but that seems a little excessive, especially when it seems someone with basic handyman skills could replicate the system for less than that. As might be expected of a custom-installed product, the proposition isn’t about a box showing up at your doorstep. If you live within 100 miles of Milwaukee (and why wouldn’t you?), the project team will install DryAway at your home if you send them the measurements of the space that it will fill. Otherwise, they recommend use of a contractor.
The Potential. DryAway offers discreet high capacity although most consumers probably don’t hang dry all of their clothes and wouldn’t need something this extensive. It does make good use of dead space in laundry rooms and seems to be an environmentally superior option. But it seems anyone who might be able to invest in this probably isn’t worried about the cost of drying their clothes. There seems to be a big middle ground between the flimsy drying stands mocked in the DryAway video and hundreds of dollars for something that’s a custom installation.
The Premise. The acoustics of life shouldn’t require a lofty price. Yet, what most of us take for granted as just another sense is a commodity that others don’t have access to due to a hearing disability. A high quality hearing aid is very expensive, and it’s a barrier that keeps one in five Americans from buying hearing aids that dig deep into their wallets.
The Product. Regardless of whether you use an iPhone or iPad, the iHear is a comfortable hearing aid that delivers crisp and clear sound. It’s waterproof, completely invisible to outside viewers, and can be adjusted to have a perfect fit within your ear in less than a minute. It offers everything that a person with a hearing disability needs, but can do so at the fraction of the cost. The low price/high quality combination makes this hearing aid much more accessible to the average consumer, and thus it gives access to sound to a much larger percentage of the population with a hearing disability.
The Pitch. Both the Indiegogo campaign and the video show that iHear is truly passionate about making hearing aids more affordable. The creators go into depth about what is included, and how customers know that they’re getting reliable hearing aids. Supporting the mission of iHear are the stories of testers who have already changed to the hearing aid. They echo the sentiment of supplying a cheaper competitor for high quality sound delivery.
The Perks. iHear gives plenty of opportunity for anyone to support their campaign and the effort to give access to hearing to more people. The iHear HD can still be claimed at its early bird price of just $149, but the hearing aid will then be priced at a reasonable $200. For those who don’t have a hearing disability, there are plenty of ways to get involved. iHear also has a philanthropic campaign of trying to deliver 1000 hearing devices for free. Pledgers can donate $10 to that cause or pay $379 to get two hearing aids for you and two hearing aids for a person in need.
iHear has also developed a PC-based hearing test that can be administered that is available at $49. Lastly, for those looking to support iHear, you can pick up earphones designed for your smartphone and MP3 player for just $39. It’s currently anticipated that the iHear devices will start being available in August 2014.
The Potential. iHear Medical has a product on its hands that means all the best for improving the lives of people with a hearing disability, but the question is whether or not people without a hearing disability are willing to pledge. iHear still needs to get FDA approval for its products, and then the task will be to challenge the six companies that control the market for these medical devices with higher-priced product.
Tremble, Androids. Quake in fear, iPhones. The Shine one is out to — What’s stronger than conquer? — uber-bliterate the Smartphone market. Playing the numbers, the Shine one wields 256 GB of ROM, 8 GB of Ram, an 18-megapixel camera , a wireless “Pulsometer,” bracelet and fitness software, 8, yes 8-speaker sound, a thermometer with app that suggests how to normalize temperature, doubly redundant (three) batteries good for nine to 12 days of life (there’s likely a good reason it’s not shown in profile), and a multitouch screen which recognizes gloved touches.
The campaign on Indiegogo — no stranger to superphone campaigns — includes prose clearly translated from another language so details are a little foggy. However, it appears that the Shine one claims to be the first phone with a tripod aperture, and that a built-in wireless charger may also be included. The backers are even throwing in free phone repair. Of course , that won’t include repair of competitors that see their screens shatter trembling n fear of the Shine one’s over-the-top specs.
Scooters can be an efficient way to get around town, but sometimes you don’t want to show up on their kids’ toys. The Australian developers at E’Lution Have worked to design a scooter that would work for adults to move around in an urban environment. This includes overcoming a few challenges, which include supporting taller and heavier humans. They also designed brakes that won’t overhea, and they changed the folding mechanisms on the scooter. While their campaign is quite ambitious with a $600,000 goal, they are happy to take donations of any size. But if you want an E’Lution Scooter, be prepared to drop $275 AUD.
![ShutIT 20140207024507-3D_Model_1_copy[1]](http://www.backerjack.com/wp-content/uploads/2014/02/ShutIT-20140207024507-3D_Model_1_copy1-300x221.jpg)
For those times when Android phones should be seen and not heard, ShutIt offers a practical solution to quieting all the bleeps and buzzes. The ShutIt provides a novel approach to adding quick access to device controls by plugging into your Android’s headphone jack. It works in conjunction with a specialized app, and saves you the hassle of rummaging through your screens to put your Android on silent mode. It also offers five additional settings of vibration, Wi-Fi, Bluetooth, Auto-Rotation, and Flashlight. The ShutIt plug comes in slate grey, capri blue, electric red, glacial white, stealth black and champagne. For at least $19, a backer gets one ShutIt plug in slate grey and full access to the app, which should ship to backers in May 2014.