Categories
Connected Objects Food and Beverage

Auroma One offers a smart solution for waking up to aroma of fresh coffee

Many coffee machines do a pretty good of making it easy to brew some java each morning.

Auroma One, however, is a modern take on the coffee machine –- a smart, single-serve coffee maker that brews the beverage based on each user’s preferences. The device learns how users prefer their coffee based on feedback from the accompanying Android and iOS app for mobile devices. Auroma One provides control over the brewing process that includes how finely the coffee beans are chopped and the coffee’s exact temperature. It also informs users when coffee beans are running low. Any coffee beans can be used with the device, according to its Kickstarter campaign.

Categories
Food and Beverage

Ember cools off hot beverages as much as you’d like

There have been several mugs for keeping coffee hot touted on crowdsourcing sites in recent months. But Ember goes a couple of steps further than a device like the Nano Heated Wireless Mug, which promises to keep coffee hot for 45 minutes.

patent-claimedEmber is a temperature-controlled travel mug that quickly cools off coffee or tea that’s too hot. It then keeps the liquid at the temperature its user chooses for two hours when on the go or all day when used with the included, cordless charging coaster, according to its Indiegogo campaign. Its patented microprocessor-controlled heating system works with a network of sensors to accomplish that.

Categories
Food and Beverage

iCup and iPlate offers a one-hand solution for juggling plates and cups

Barbecue and beer go together like summer and sunburn. But it’s sometimes tough to juggle both food and beverage while mingling .  A plate in one hand and a drink in the other doesn’t leave much for greeting guests at social gatherings and trying to balance the cup on top of the plate risks spillage.

The iCup and iPlate hope to slide in a solution to the issue of one-handed consumption  The cup attaches into grooves on the bottom of the plate so that it doubles as a handle. The plate also acts as a lid to keep the bugs out of the drink and the cup acts to stabilize the plate. If the food needs utensils, the iFork and iKnife snap into the sides of the plate for easy access. Finally, by helping guests keep their cup close at hand, the system helps address the issue of identifying whose cup belongs to whom. A starter set of four (dispsoable) cups, four plates, and four sets of utensils is only $15, with expected delivery of November 2015. The campaign hopes to raise $10,000 by August 13, 2015,

It would be nice to have a non-disposable option. And, of course, taking full advantage of the plasticware requires getting all the products from one source. Still, the plate and cup combo is an ingenious solution to an age-old problem that looks at the drink-balancing issue from the reverse perspective. It doesn’t make guests look silly even though they’ll probably have to be shown the sliding trick.

Categories
Food and Beverage

Bartesian cocktail mixer is a Keurig that swears it doesn’t have a drinking problem

Mixing cocktails can be fun but it can also be time-consuming and expensive if you need to hire a bartender. And at a party, the host can get bogged down making drinks.

Bartesian hopes to solve the cocktail crisis. The idea piggybacks off of the popular single-serve coffee maker by Keurig. If that device is designed to wake one up, this one is here to help one party down. Essentially, the drinker provides the alcohol and the Bartesian uses recyclable pods to mix the drink with aplomb. Right now, Bartesian offers three well-known drinks and three signature drinks that include a margarita, cosmopolitan, and sex on the beach. Each Bartesian costs $299, and the campaign hopes to raise $100,000 by July 26th. The robot bartenders would be delivered by April 2016.

Bartesian’s main challenges will be whether its pod-enclosed drinks live up to freshly made ones as well as trying to develop a wide range of pods for the endless varieties of cocktails. As we learned in the coffee pod wars, only one or two can really survive. Bartesian is not only a far cry from those industrial bartenders promoted on luxury cruises, but comes on the heels of another crowdfunded cocktail maker in Somabar, which is $150 more.

Categories
Food and Beverage

Miito is a mighty quick and energy-efficient way to heat liquids

The standard method used to heat liquids including water has been with a kettle or pot. But that traditional system often leads to a lot of waste of water and other liquids because people tend to heat more than they actually use. The traditional heating method also requires a lot of energy.

Miito is a device designed to solve those issues. It is made up of a small, circular induction base unit that the user places a cup or any other vessel on and a heating rod that then gets placed inside the vessel and quickly brings the water, soup or almost any other liquid to a boil. Miito will cost about $100 when it ships in April 2016. Its makers set a Kickstarter goal of raising $167,383 by June 14.

Categories
Food and Beverage

Hotshot contains its excitement, brings the heat to canned coffee

People waste so much money each year on coffee runs. Whether they’re visiting a chain or their local coffee shop, most can’t help stop in at least once a day for that much-needed boost of energy.

patent-claimedHotshot provides a way to save money on coffee while still enjoying that little kick. The Hotshot system consists of a heater that can hold up to 12 cans at once. That’s right, it heats up coffee in cans. Hotshot features many different flavors and even has hot chocolate. From a safety perspective, the label on the cans prevents users from burning themselves. Hotshot’s heater, the HotBox, plugs into the wall and measures 10” wide, 4” deep and 10” tall. It uses innovative conductive heating technology and uses 75% less energy than a refrigerator.

Hotshot does seem like a good alternative to traditional ways of drinking coffee. It’s cost-effective and offers a chance to carry around more coffee than is possible with a traditional thermos. The product also claims to be more environmentally-friendly than the K-Cup. While a little silly looking, Hotshot does manage to give people hot coffee on the go. One will cost backers $99 for delivery in December 2015. This product is looking to raise $100,000 by May 13 on Kickstarter.

Categories
Food and Beverage

Ican warms office grinch’s heart by keeping coffee warm or soda cold

While the product’s video doesn’t seem to have much of a point to it as it plays the Grinch song, the point of ican itself seems to be that it can function as a personal drink warmer or cooler. The hot coffee poured into one’s mug at the office can stay hot during that excruciatingly boring board meeting; or that cold can of soda can stay cool while crunching headache-inducing numbers.

The personal drink heating and cooling unit plugs into a standard outlet, and there are plans in the works for it to be able to plug into a car cigarette lighter and run off of the car battery for all of those road warriors out there.

Ican seems to be an interesting idea worth checking into further. Backers who like having their drinks delivered on demand might like to check out the Rover remote control cooler.This campaign seeks to raise $40,000 in funding. For $125, backers get one product with an expected delivery in July of this year.

Categories
Food and Beverage

Pop & Stop pops open a cold one, stops beer waste

It’s frustrating when a beer drinker opens up a cold one and somebody carelessly knocks it over–especially when it’s an expensive brew. Equally frustrating is when somebody wants to save the rest of that bottle of premium beer for the next day (or up to 48 hours later) after passing out drunk before being able to finish it.The two-in-one bottle opener and sealer Pop & Stop was created mainly to address the catastrophic problem of beer waste.

The keychain-sized product is designed to be portable and replace the bottle opener that many people already carry. It won’t cut your leg if it’s in your pocket and move the wrong way, like some traditional metal bottle openers will. More importantly, it has the added advantage of also serving as a sealing device for a bottle after it’s opened. Backers who pledge $6 will get a molded unit when it ships in May, while those who pledge $8 will get a 3D printed one immediately. The Denver inventor who made it is looking to raise $8,500 by Feb. 21.

There is a huge potential market for Pop & Stop. Unfortunately, it won’t work on some twist-off bottles. So, if the drinker’s favorite beer only comes in that kind of bottle, the product will have little appeal to that person. The molded version has a smoother texture than the 3D printed version, and also features stronger plastic. But the molded version is not recyclable, a distinct drawback.

Categories
Food and Beverage

Brewski lets you create signature beer, wine or cider at home

Creating one’s own drinks can make for a great conversation starter at a party or when entertaining at home. And Brewski allows those who enjoy exercising their creative muscles in this area the opportunity to make beer, wine or cider and flavor it to personal tastes.

The drink creation station makes about 2.5 gallons at a time (or 30 standard beer bottles) and stores easily on a shelf or convenient counter space. Brewski offers video tutorials that explain how to create beer using the product and included brewing kit, or it is compatible with other brewing kits. Beer bottles with non-twist tops can be washed, refilled and recapped with the bottle capper.

Interested backers might also want to check out Brewie, a similar home-brewing product, but one that doesn’t offer wine and cider like the Brewski does. This campaign seeks to raise $150,000 NZD (~$112,000 USD) on Kickstarter. Early bird backers get one product for $369 (~$275 USD) with an expected delivery of July 2015.

Categories
Cooking

Find-A-Scoop seeks missing powder measuring mechanisms

Powdered products can be a great help in the kitchen when cooking, or for those who enjoy their protein and fruit drinks. But digging out a scoop that has sunk to the bottom of a canister makes for an inconvenient mess that can cause some waste.

So Find-A-Scoop was designed to put a stop to having to dig around both small and large containers. The BPA-free, dishwasher safe product has three features: a no-slip finger grip, a slatted power-draining dipper, and an extended reach handle. The mini scoop is ¼” deep, and the full size scoop is 1″ deep.

The product seems like it would be easy enough to use, but a slatted cooking spoon might do the job just as well. Backers interested in healthy-lifestyle items might also like to check out Made, Armadillo Colander,  Go-Shake, Fab, and Rotissa-Fry. This campaign seeks to raise $35,000 by February 11, 2015. For $10, backers get one full and mini size scoop with an expected delivery of October 2015.